R Chemine Products Private Limited has a variety of plastic additives to offer for various types of polymers & applications. Acquire these essential plastic additives for plastic formulations that maintain and/or modify polymer properties to put it for long-term use. Witness a significant impact by adding a small percentage while formulation. Additives that add value to your end product.
PFAS Free Polymer Processing Aid (PPA). This Fluorine free PPA enhances polyolefin processing.
Reduces water carry over problem on high speed tape line at high speed operation. Improves strength of the tape.
Multi purpose processing aid suitable for highly filled PE/PP compounds & TPE/TPO compounds. Improves homogeneous dispersion of filler and additives.
Low melting point processing aid. Enables better homogeneous dispersion of pigments, filler & additives. Suitable for PE/PP colour masterbatch/compounds & filled CaCO3/Talc polyolefins compounds.
Oleochemical derivative. Improves dispersion in PE/PP colour masterbatch/compounds & Highly filler CaCO3/Talc Polyolefins compounds.
Ethylene-Bis-Stearamide. Acts as internal/external lubricant in almost all thermoplastic & thermoset systems. Improves flow and mould release in filled PP / PE compound & also for Polyamide/Nylon & ABS/Polystyrene.
Unsaturated fatty acid derived from oleic acid. Oleamide acts as a slip additive in polyolefins. Acts as a lubricant & mould release agent in processing of thermoplastics & thermosets systems.
Primary fatty acid amide. Stearamide offers anti - block properties for Polyolefins. Acts as lubricant in PVC.
Pure Zinc Stearate manufactured via fusion process by using the highest quality of raw materials. It exhibits excellent lubricating and dispersing properties. It also has excellent water repellent properties.
High purity, non-wettable Calcium Stearate powder manufactured via modified fusion process using high quality raw materials. Works as an effective elastomer processing aid and release agent. Calcium Stearate allows for complete product dispersion in elastomers.
Additive specially developed for black masterbatch. Improves surface finish
Zinc Stearate based additive for highly filled CacO3/Talc based Polyolefins compounds. Improves flow and dispersion of filler & additives.
Oleochemical derivative. Suitable for Talc based filler compounds. Improves flow and hence improves the throughput rate of production. Gives best results when used with R Chem Add Disperse - P.
White pigment for polyolefin masterbatch. It is a partial replacement of TiO2. R Chem Add Disperse - L can replace upto 25% TiO2. Ensures excellent hiding and mechanical properties.
Glycerol Monostearate (NSE) with 40% min. Monoglycerides. Works as a lubricant for PVC. Acts as an anti static agent in polyolefins based masterbatch. Improves dispersion of dyes & pigments in masterbatch.
Micronized PE Wax finds its uses in applications such as Color masterbatch, Cable compounds, Coatings, Printing inks and many more.
Antioxidant 1010 (AO 1010) is a high molecular weight hindered phenolic primary antioxidant. It is a highly effective, non-discoloring stabilizer for organic substrate such as plastics, elastomers, synthetics fibres, adhesive and sealant, wax, oil and fats. It protects these substrate against thermo-oxidative degradation.
Antioxidant 1076 (AO 1076) is a sterically hindered phenolic antioxidant. It is a highly efficient and non-discolouring stabilizer for organic substrates such as plastics, synthetic fibres, elastomers, adhesives, waxes, oils and fats. It protects these substrates against thermo-oxidative degradation. Antioxidant 1076 (AO 1076) is odourless, stable to light and has good compatibility with most substrates, low volatility and high resistance to extraction.
Antioxidant MD 1024 is a sterically hindered phenolic antioxidant, used in polyethylene wires and cable resins, filled polyolefins, SRB, X-SBR, NBR fuel hoses in contact with copper & in styrene homo and co-polymer.
Antioxidant 1098 (AO 1098) is a sterically hindered phenolic antioxidant, an efficient, non- discoloring stabilizer for organic substrates such as plastics, synthetic fibers, adhesives, and elastomers, and is specifically effective in polyamide and fibers.
Antioxidant 1330 (AO 133o) is a sterically hindered phenolic antioxidant, used in polyolefins e.g. polyethylene, polypropylene, polybutene for the stabilization of pipes, moulded articles, wires and cables, dielectric films. In engineering plastics like linear polyesters, polyamides, and styrene homo and copolymers. In PVC, polyurethanes, elastomers, adhesives, and other organic substrates.
Antioxidant 168 (AO 168) is a hydrolytically stable phosphate processing stabilizer. As a secondary antioxidant Antioxidant 168 (AO 168) reacts during processing with hydro-peroxides formed by auto-oxidation of polymers preventing process including degradation and extending the performance of primary antioxidant.
Synergistic blend of Antioxidant 1010 and Antioxidant 168 (1:2)
Synergistic blend of Antioxidant 1010 and Antioxidant 168 (1:1)
Synergistic blend of Antioxidant 1076 and Antioxidant 168 (1:4)
Synergistic blend of Antioxidant 1076 and Antioxidant 168 (1:2)
UV 770 is a low molecular weight hindered amine light stabilizer (HALS). It is a highly effective radical scavenger that protects organic polymers against degradation caused by exposure to ultraviolet radiation.
UV 944 is a high molecular weight hindered amine light stabilizer (HALS). It shows excellent compatibility, high resistance to extraction and low volatility.
UV 622 is a polymerized hindered amine light stabilizer with high molecular weight, low volatility and low degradation, hardly extractable by water. UV 622 is as effective as an antioxidant and contributes significantly to the long-term heat stability of polyolefins and tackifier resins.
UV 783 is a synergistic blend of UV 622 and UV 944. It is a versatile light stabilizer with good extraction resistance, low gas fading and low pigment interaction. UV 783 is well suited for LDPE, LLDPE, HDPE films, tapes and thick sections and for PP films. UV 783 is also the product of choice for thick sections where indirect food contact approval is required.
UV 292 is a liquid hindered amine light stabilizer developed especially for coatings. The almost pure mixture of Bis (1, 2, 2, 6, 6-pentamethyl-4-piperidyl) sebacate and Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate keeps the product liquid even at room temperature. The efficiency of UV 292 provides significantly extended lifetime to coatings by minimizing paint defects such as loss of gloss and cracking.
UV-P is an UV Absorber of the hydroxyphenol benzotriazole class, imparting good light stability to a wide variety of polymers during its use.
UV 326 is an UV Absorber of the hydroxyphenyl benzotriazole class, especially suited for polyolefins and cold cured polyesters.
UV 328 is a high-performance UV absorber that can effectively absorb 270-340 nm UV light. Its performance is similar to that of UV-326 and UV-327 while better compatibility with the resin, low thermal evaporation and high washing resistance.
Optical brightener OB-1 is an oxazole whitening agent with excellent performance. It is mainly used for whitening polyester, ABS, PS, HIPS, PA, PC, PP, EVA, rigid PVC, etc. It can also be used as a fluorescent whitening agent for nylon.
Optical brightener OB-1 is an oxazole whitening agent with excellent performance. It is mainly used for whitening polyester, ABS, PS, HIPS, PA, PC, PP, EVA, rigid PVC, etc. It can also be used as a fluorescent whitening agent for nylon.
Optical Brightener FP 127 is a good plastic fluorescent whitening agent, which can be used for polymer, paint, printing ink and synthetic fiber whitening, brightening. Mainly used in PVC whitening agent, and artificial leather whitening, especially for a variety of plastics and plastic products have a good whitening effect.
Calcium Carbonate is the most widely used mineral in Plastics. It improves various important properties of the end product and is very economical. R Chemine offers both uncoated & coated Calcium Carbonates of various particle sizes to suit the customers needs.
Talc is a very important functional filler used in plastics. It helps to increase heat resistance and reduce shrinkage. It is also used as reinforcing filler because of its platy particle size & purity.
Sodium Sulphate is an engineered anhydrous sulphate salt which is chemically very stable & is unreactive towards most oxidizing or reducing agents at room temperature. It is derived with a unique surface treatment which enhances dispersion during compounding application.
Precipitated BaSO4 is commonly used as a filler for plastics to increase the density of the polymer in vibrational mass damping applications. It is resistant to acid and alkalis, and has good weathering resistance and improves opacity.
Oleochemical derivative. Improves dispersion in PE/PP colour masterbatch/compounds & Highly filler CaCO3/Talc Polyolefins compounds.
Ethylene-Bis-Stearamide. Acts as internal/external lubricant in almost all thermoplastic & thermoset systems. Improves flow and mould release in filled PP / PE compound & also for Polyamide/Nylon & ABS/Polystyrene.
Primary fatty acid amide. Stearamide offers anti - block properties for Polyolefins. Acts as lubricant in PVC.
Glycerol Monostearate (NSE) with 40% min. Monoglycerides. Works as a lubricant for PVC. Acts as an anti static agent in polyolefins based masterbatch. Improves dispersion of dyes & pigments in masterbatch.
Pure Zinc Stearate manufactured via fusion process by using the highest quality of raw materials. It exhibits excellent lubricating and dispersing properties. It also has excellent water repellent properties.
High purity, non-wettable Calcium Stearate powder manufactured via modified fusion process using high quality raw materials. Works as an effective elastomer processing aid and release agent. Calcium Stearate allows for complete product dispersion in elastomers.
Antioxidant 1010 (AO 1010) is a high molecular weight hindered phenolic primary antioxidant. It is a highly effective, non-discoloring stabilizer for organic substrate such as plastics, elastomers, synthetics fibres, adhesive and sealant, wax, oil and fats. It protects these substrate against thermo-oxidative degradation.
Antioxidant 1076 (AO 1076) is a sterically hindered phenolic antioxidant. It is a highly efficient and non-discolouring stabilizer for organic substrates such as plastics, synthetic fibres, elastomers, adhesives, waxes, oils and fats. It protects these substrates against thermo-oxidative degradation. Antioxidant 1076 (AO 1076) is odourless, stable to light and has good compatibility with most substrates, low volatility and high resistance to extraction.
Antioxidant MD 1024 is a sterically hindered phenolic antioxidant, used in polyethylene wires and cable resins, filled polyolefins, SRB, X-SBR, NBR fuel hoses in contact with copper & in styrene homo and co-polymer.
Antioxidant 1098 (AO 1098) is a sterically hindered phenolic antioxidant, an efficient, non- discoloring stabilizer for organic substrates such as plastics, synthetic fibers, adhesives, and elastomers, and is specifically effective in polyamide and fibers.
Antioxidant 1330 (AO 133o) is a sterically hindered phenolic antioxidant, used in polyolefins e.g. polyethylene, polypropylene, polybutene for the stabilization of pipes, moulded articles, wires and cables, dielectric films. In engineering plastics like linear polyesters, polyamides, and styrene homo and copolymers. In PVC, polyurethanes, elastomers, adhesives, and other organic substrates.
Antioxidant 168 (AO 168) is a hydrolytically stable phosphate processing stabilizer. As a secondary antioxidant Antioxidant 168 (AO 168) reacts during processing with hydro-peroxides formed by auto-oxidation of polymers preventing process including degradation and extending the performance of primary antioxidant.
Synergistic blend of Antioxidant 1010 and Antioxidant 168 (1:2)
Synergistic blend of Antioxidant 1010 and Antioxidant 168 (1:1)
Synergistic blend of Antioxidant 1076 and Antioxidant 168 (1:4)
Synergistic blend of Antioxidant 1076 and Antioxidant 168 (1:2)
UV 770 is a low molecular weight hindered amine light stabilizer (HALS). It is a highly effective radical scavenger that protects organic polymers against degradation caused by exposure to ultraviolet radiation.
UV 944 is a high molecular weight hindered amine light stabilizer (HALS). It shows excellent compatibility, high resistance to extraction and low volatility.
UV 622 is a polymerized hindered amine light stabilizer with high molecular weight, low volatility and low degradation, hardly extractable by water. UV 622 is as effective as an antioxidant and contributes significantly to the long-term heat stability of polyolefins and tackifier resins.
UV 783 is a synergistic blend of UV 622 and UV 944. It is a versatile light stabilizer with good extraction resistance, low gas fading and low pigment interaction. UV 783 is well suited for LDPE, LLDPE, HDPE films, tapes and thick sections and for PP films. UV 783 is also the product of choice for thick sections where indirect food contact approval is required.
UV 292 is a liquid hindered amine light stabilizer developed especially for coatings. The almost pure mixture of Bis (1, 2, 2, 6, 6-pentamethyl-4-piperidyl) sebacate and Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate keeps the product liquid even at room temperature. The efficiency of UV 292 provides significantly extended lifetime to coatings by minimizing paint defects such as loss of gloss and cracking.
UV-P is an UV Absorber of the hydroxyphenol benzotriazole class, imparting good light stability to a wide variety of polymers during its use.
UV 326 is an UV Absorber of the hydroxyphenyl benzotriazole class, especially suited for polyolefins and cold cured polyesters.
UV 328 is a high-performance UV absorber that can effectively absorb 270-340 nm UV light. Its performance is similar to that of UV-326 and UV-327 while better compatibility with the resin, low thermal evaporation and high washing resistance.
Optical brightener OB-1 is an oxazole whitening agent with excellent performance. It is mainly used for whitening polyester, ABS, PS, HIPS, PA, PC, PP, EVA, rigid PVC, etc. It can also be used as a fluorescent whitening agent for nylon.
Optical brightener OB-1 is an oxazole whitening agent with excellent performance. It is mainly used for whitening polyester, ABS, PS, HIPS, PA, PC, PP, EVA, rigid PVC, etc. It can also be used as a fluorescent whitening agent for nylon.
Optical Brightener FP 127 is a good plastic fluorescent whitening agent, which can be used for polymer, paint, printing ink and synthetic fiber whitening, brightening. Mainly used in PVC whitening agent, and artificial leather whitening, especially for a variety of plastics and plastic products have a good whitening effect.
Calcium Carbonate is the most widely used mineral in Plastics. It improves various important properties of the end product and is very economical. R Chemine offers both uncoated & coated Calcium Carbonates of various particle sizes to suit the customers needs.
Kaolin or China clay, is a soft white clay mineral. In plastics, kaolin helps improve mechanical properties, electrical & chemical resistance. It also improves electrical & mechanical properties of wires & cables. R Chemine offers both Hydrous & Calcined Kaolin with a wide range of particle sizes to meet customers requirements.
Oleochemical derivative. Improves dispersion in PE/PP colour masterbatch/compounds & Highly filler CaCO3/Talc Polyolefins compounds.
Ethylene-Bis-Stearamide. Acts as internal/external lubricant in almost all thermoplastic & thermoset systems. Improves flow and mould release in filled PP / PE compound & also for Polyamide/Nylon & ABS/Polystyrene.
Antioxidant 1010 (AO 1010) is a high molecular weight hindered phenolic primary antioxidant. It is a highly effective, non-discoloring stabilizer for organic substrate such as plastics, elastomers, synthetics fibres, adhesive and sealant, wax, oil and fats. It protects these substrate against thermo-oxidative degradation.
Antioxidant 1076 (AO 1076) is a sterically hindered phenolic antioxidant. It is a highly efficient and non-discolouring stabilizer for organic substrates such as plastics, synthetic fibres, elastomers, adhesives, waxes, oils and fats. It protects these substrates against thermo-oxidative degradation. Antioxidant 1076 (AO 1076) is odourless, stable to light and has good compatibility with most substrates, low volatility and high resistance to extraction.
Antioxidant MD 1024 is a sterically hindered phenolic antioxidant, used in polyethylene wires and cable resins, filled polyolefins, SRB, X-SBR, NBR fuel hoses in contact with copper & in styrene homo and co-polymer.
Antioxidant 1098 (AO 1098) is a sterically hindered phenolic antioxidant, an efficient, non- discoloring stabilizer for organic substrates such as plastics, synthetic fibers, adhesives, and elastomers, and is specifically effective in polyamide and fibers.
Antioxidant 1330 (AO 133o) is a sterically hindered phenolic antioxidant, used in polyolefins e.g. polyethylene, polypropylene, polybutene for the stabilization of pipes, moulded articles, wires and cables, dielectric films. In engineering plastics like linear polyesters, polyamides, and styrene homo and copolymers. In PVC, polyurethanes, elastomers, adhesives, and other organic substrates.
Antioxidant 168 (AO 168) is a hydrolytically stable phosphate processing stabilizer. As a secondary antioxidant Antioxidant 168 (AO 168) reacts during processing with hydro-peroxides formed by auto-oxidation of polymers preventing process including degradation and extending the performance of primary antioxidant.
Synergistic blend of Antioxidant 1010 and Antioxidant 168 (1:2)
Synergistic blend of Antioxidant 1010 and Antioxidant 168 (1:1)
Synergistic blend of Antioxidant 1076 and Antioxidant 168 (1:4)
Synergistic blend of Antioxidant 1076 and Antioxidant 168 (1:2)
UV 770 is a low molecular weight hindered amine light stabilizer (HALS). It is a highly effective radical scavenger that protects organic polymers against degradation caused by exposure to ultraviolet radiation.
UV 944 is a high molecular weight hindered amine light stabilizer (HALS). It shows excellent compatibility, high resistance to extraction and low volatility.
UV 622 is a polymerized hindered amine light stabilizer with high molecular weight, low volatility and low degradation, hardly extractable by water. UV 622 is as effective as an antioxidant and contributes significantly to the long-term heat stability of polyolefins and tackifier resins.
UV 783 is a synergistic blend of UV 622 and UV 944. It is a versatile light stabilizer with good extraction resistance, low gas fading and low pigment interaction. UV 783 is well suited for LDPE, LLDPE, HDPE films, tapes and thick sections and for PP films. UV 783 is also the product of choice for thick sections where indirect food contact approval is required.
UV 292 is a liquid hindered amine light stabilizer developed especially for coatings. The almost pure mixture of Bis (1, 2, 2, 6, 6-pentamethyl-4-piperidyl) sebacate and Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate keeps the product liquid even at room temperature. The efficiency of UV 292 provides significantly extended lifetime to coatings by minimizing paint defects such as loss of gloss and cracking.
UV-P is an UV Absorber of the hydroxyphenol benzotriazole class, imparting good light stability to a wide variety of polymers during its use.
UV 326 is an UV Absorber of the hydroxyphenyl benzotriazole class, especially suited for polyolefins and cold cured polyesters.
UV 328 is a high-performance UV absorber that can effectively absorb 270-340 nm UV light. Its performance is similar to that of UV-326 and UV-327 while better compatibility with the resin, low thermal evaporation and high washing resistance.
Optical brightener OB-1 is an oxazole whitening agent with excellent performance. It is mainly used for whitening polyester, ABS, PS, HIPS, PA, PC, PP, EVA, rigid PVC, etc. It can also be used as a fluorescent whitening agent for nylon.
Optical brightener OB-1 is an oxazole whitening agent with excellent performance. It is mainly used for whitening polyester, ABS, PS, HIPS, PA, PC, PP, EVA, rigid PVC, etc. It can also be used as a fluorescent whitening agent for nylon.
Optical Brightener FP 127 is a good plastic fluorescent whitening agent, which can be used for polymer, paint, printing ink and synthetic fiber whitening, brightening. Mainly used in PVC whitening agent, and artificial leather whitening, especially for a variety of plastics and plastic products have a good whitening effect.
Calcium Carbonate is the most widely used mineral in Plastics. It improves various important properties of the end product and is very economical. R Chemine offers both uncoated & coated Calcium Carbonates of various particle sizes to suit the customers needs.
Talc is a very important functional filler used in plastics. It helps to increase heat resistance and reduce shrinkage. It is also used as reinforcing filler because of its platy particle size & purity.
Ethylene-Bis-Stearamide. Acts as internal/external lubricant in almost all thermoplastic & thermoset systems. Improves flow and mould release in filled PP / PE compound & also for Polyamide/Nylon & ABS/Polystyrene.
Pure Zinc Stearate manufactured via fusion process by using the highest quality of raw materials. It exhibits excellent lubricating and dispersing properties. It also has excellent water repellent properties.
High purity, non-wettable Calcium Stearate powder manufactured via modified fusion process using high quality raw materials. Works as an effective elastomer processing aid and release agent. Calcium Stearate allows for complete product dispersion in elastomers.
Antioxidant 1010 (AO 1010) is a high molecular weight hindered phenolic primary antioxidant. It is a highly effective, non-discoloring stabilizer for organic substrate such as plastics, elastomers, synthetics fibres, adhesive and sealant, wax, oil and fats. It protects these substrate against thermo-oxidative degradation.
Antioxidant 1076 (AO 1076) is a sterically hindered phenolic antioxidant. It is a highly efficient and non-discolouring stabilizer for organic substrates such as plastics, synthetic fibres, elastomers, adhesives, waxes, oils and fats. It protects these substrates against thermo-oxidative degradation. Antioxidant 1076 (AO 1076) is odourless, stable to light and has good compatibility with most substrates, low volatility and high resistance to extraction.
Antioxidant MD 1024 is a sterically hindered phenolic antioxidant, used in polyethylene wires and cable resins, filled polyolefins, SRB, X-SBR, NBR fuel hoses in contact with copper & in styrene homo and co-polymer.
Antioxidant 1098 (AO 1098) is a sterically hindered phenolic antioxidant, an efficient, non- discoloring stabilizer for organic substrates such as plastics, synthetic fibers, adhesives, and elastomers, and is specifically effective in polyamide and fibers.
Antioxidant 1330 (AO 133o) is a sterically hindered phenolic antioxidant, used in polyolefins e.g. polyethylene, polypropylene, polybutene for the stabilization of pipes, moulded articles, wires and cables, dielectric films. In engineering plastics like linear polyesters, polyamides, and styrene homo and copolymers. In PVC, polyurethanes, elastomers, adhesives, and other organic substrates.
Antioxidant 168 (AO 168) is a hydrolytically stable phosphate processing stabilizer. As a secondary antioxidant Antioxidant 168 (AO 168) reacts during processing with hydro-peroxides formed by auto-oxidation of polymers preventing process including degradation and extending the performance of primary antioxidant.
Synergistic blend of Antioxidant 1010 and Antioxidant 168 (1:2)
Synergistic blend of Antioxidant 1010 and Antioxidant 168 (1:1)
Synergistic blend of Antioxidant 1076 and Antioxidant 168 (1:4)
Synergistic blend of Antioxidant 1076 and Antioxidant 168 (1:2)
UV 770 is a low molecular weight hindered amine light stabilizer (HALS). It is a highly effective radical scavenger that protects organic polymers against degradation caused by exposure to ultraviolet radiation.
UV 944 is a high molecular weight hindered amine light stabilizer (HALS). It shows excellent compatibility, high resistance to extraction and low volatility.
UV 622 is a polymerized hindered amine light stabilizer with high molecular weight, low volatility and low degradation, hardly extractable by water. UV 622 is as effective as an antioxidant and contributes significantly to the long-term heat stability of polyolefins and tackifier resins.
UV 783 is a synergistic blend of UV 622 and UV 944. It is a versatile light stabilizer with good extraction resistance, low gas fading and low pigment interaction. UV 783 is well suited for LDPE, LLDPE, HDPE films, tapes and thick sections and for PP films. UV 783 is also the product of choice for thick sections where indirect food contact approval is required.
UV 292 is a liquid hindered amine light stabilizer developed especially for coatings. The almost pure mixture of Bis (1, 2, 2, 6, 6-pentamethyl-4-piperidyl) sebacate and Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate keeps the product liquid even at room temperature. The efficiency of UV 292 provides significantly extended lifetime to coatings by minimizing paint defects such as loss of gloss and cracking.
UV-P is an UV Absorber of the hydroxyphenol benzotriazole class, imparting good light stability to a wide variety of polymers during its use.
UV 326 is an UV Absorber of the hydroxyphenyl benzotriazole class, especially suited for polyolefins and cold cured polyesters.
UV 328 is a high-performance UV absorber that can effectively absorb 270-340 nm UV light. Its performance is similar to that of UV-326 and UV-327 while better compatibility with the resin, low thermal evaporation and high washing resistance.
Optical brightener OB-1 is an oxazole whitening agent with excellent performance. It is mainly used for whitening polyester, ABS, PS, HIPS, PA, PC, PP, EVA, rigid PVC, etc. It can also be used as a fluorescent whitening agent for nylon.
Optical brightener OB-1 is an oxazole whitening agent with excellent performance. It is mainly used for whitening polyester, ABS, PS, HIPS, PA, PC, PP, EVA, rigid PVC, etc. It can also be used as a fluorescent whitening agent for nylon.
Optical Brightener FP 127 is a good plastic fluorescent whitening agent, which can be used for polymer, paint, printing ink and synthetic fiber whitening, brightening. Mainly used in PVC whitening agent, and artificial leather whitening, especially for a variety of plastics and plastic products have a good whitening effect.
Ethylene-Bis-Stearamide. Acts as internal/external lubricant in almost all thermoplastic & thermoset systems. Improves flow and mould release in filled PP / PE compound & also for Polyamide/Nylon & ABS/Polystyrene.
Pure Zinc Stearate manufactured via fusion process by using the highest quality of raw materials. It exhibits excellent lubricating and dispersing properties. It also has excellent water repellent properties.
High purity, non-wettable Calcium Stearate powder manufactured via modified fusion process using high quality raw materials. Works as an effective elastomer processing aid and release agent. Calcium Stearate allows for complete product dispersion in elastomers.
Antioxidant 1010 (AO 1010) is a high molecular weight hindered phenolic primary antioxidant. It is a highly effective, non-discoloring stabilizer for organic substrate such as plastics, elastomers, synthetics fibres, adhesive and sealant, wax, oil and fats. It protects these substrate against thermo-oxidative degradation.
Antioxidant 1076 (AO 1076) is a sterically hindered phenolic antioxidant. It is a highly efficient and non-discolouring stabilizer for organic substrates such as plastics, synthetic fibres, elastomers, adhesives, waxes, oils and fats. It protects these substrates against thermo-oxidative degradation. Antioxidant 1076 (AO 1076) is odourless, stable to light and has good compatibility with most substrates, low volatility and high resistance to extraction.
Antioxidant MD 1024 is a sterically hindered phenolic antioxidant, used in polyethylene wires and cable resins, filled polyolefins, SRB, X-SBR, NBR fuel hoses in contact with copper & in styrene homo and co-polymer.
Antioxidant 1098 (AO 1098) is a sterically hindered phenolic antioxidant, an efficient, non- discoloring stabilizer for organic substrates such as plastics, synthetic fibers, adhesives, and elastomers, and is specifically effective in polyamide and fibers.
Antioxidant 1330 (AO 133o) is a sterically hindered phenolic antioxidant, used in polyolefins e.g. polyethylene, polypropylene, polybutene for the stabilization of pipes, moulded articles, wires and cables, dielectric films. In engineering plastics like linear polyesters, polyamides, and styrene homo and copolymers. In PVC, polyurethanes, elastomers, adhesives, and other organic substrates.
Antioxidant 168 (AO 168) is a hydrolytically stable phosphate processing stabilizer. As a secondary antioxidant Antioxidant 168 (AO 168) reacts during processing with hydro-peroxides formed by auto-oxidation of polymers preventing process including degradation and extending the performance of primary antioxidant.
Synergistic blend of Antioxidant 1010 and Antioxidant 168 (1:2)
Synergistic blend of Antioxidant 1010 and Antioxidant 168 (1:1)
Synergistic blend of Antioxidant 1076 and Antioxidant 168 (1:4)
Synergistic blend of Antioxidant 1076 and Antioxidant 168 (1:2)
UV 770 is a low molecular weight hindered amine light stabilizer (HALS). It is a highly effective radical scavenger that protects organic polymers against degradation caused by exposure to ultraviolet radiation.
UV 944 is a high molecular weight hindered amine light stabilizer (HALS). It shows excellent compatibility, high resistance to extraction and low volatility.
UV 622 is a polymerized hindered amine light stabilizer with high molecular weight, low volatility and low degradation, hardly extractable by water. UV 622 is as effective as an antioxidant and contributes significantly to the long-term heat stability of polyolefins and tackifier resins.
UV 783 is a synergistic blend of UV 622 and UV 944. It is a versatile light stabilizer with good extraction resistance, low gas fading and low pigment interaction. UV 783 is well suited for LDPE, LLDPE, HDPE films, tapes and thick sections and for PP films. UV 783 is also the product of choice for thick sections where indirect food contact approval is required.
UV 292 is a liquid hindered amine light stabilizer developed especially for coatings. The almost pure mixture of Bis (1, 2, 2, 6, 6-pentamethyl-4-piperidyl) sebacate and Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate keeps the product liquid even at room temperature. The efficiency of UV 292 provides significantly extended lifetime to coatings by minimizing paint defects such as loss of gloss and cracking.
UV-P is an UV Absorber of the hydroxyphenol benzotriazole class, imparting good light stability to a wide variety of polymers during its use.
UV 326 is an UV Absorber of the hydroxyphenyl benzotriazole class, especially suited for polyolefins and cold cured polyesters.
UV 328 is a high-performance UV absorber that can effectively absorb 270-340 nm UV light. Its performance is similar to that of UV-326 and UV-327 while better compatibility with the resin, low thermal evaporation and high washing resistance.
Optical brightener OB-1 is an oxazole whitening agent with excellent performance. It is mainly used for whitening polyester, ABS, PS, HIPS, PA, PC, PP, EVA, rigid PVC, etc. It can also be used as a fluorescent whitening agent for nylon.
Optical brightener OB-1 is an oxazole whitening agent with excellent performance. It is mainly used for whitening polyester, ABS, PS, HIPS, PA, PC, PP, EVA, rigid PVC, etc. It can also be used as a fluorescent whitening agent for nylon.
Optical Brightener FP 127 is a good plastic fluorescent whitening agent, which can be used for polymer, paint, printing ink and synthetic fiber whitening, brightening. Mainly used in PVC whitening agent, and artificial leather whitening, especially for a variety of plastics and plastic products have a good whitening effect.
Calcium Carbonate is the most widely used mineral in Plastics. It improves various important properties of the end product and is very economical. R Chemine offers both uncoated & coated Calcium Carbonates of various particle sizes to suit the customers needs.
Our advanced range of Rubber additives are vital components for rubber formulations. These additives can help in formulating long lasting, top quality rubber. It allows hassle free modification with minimal usage. Purchase additives with Rchemine’s assurity.
Processing aid and filler dispersant for rubber polymers. Suitable for NR, SBR, , BR, EPDM, CR & EVA.
Highly effective processing additive & release agent for rubber polymers. Also helps to prevent sticking of elastomers & compounds to rotor rolls & calendars. Suitable for NBR, NR, ACM, CSM, SBR, IR, BR, HNBR & XNBR.
Improves flow properties and mould release in rubber compounds. Suitable for NR, SBR, EPDM, CR, IR, CM, ACM & thermoplastic elastomers.
Plays a vital role in masticating and homogenizing when more than one polymer like NR/PBR, NR/SBR, NR/NBR or any two different polymer base compounds are to be mixed. It even helps in proper dispersion of the fillers in such compounds.
Unsaturated fatty acid derived from oleic acid. Oleamide acts as a slip additive in polyolefins. Acts as a lubricant & mould release agent in processing of thermoplastic elastomers & thermoset rubber systems.
Stearamide acts as a lubricant, slip and release agent in elastomers. Suitable for NR, EPDM, SBR, NBR and many more.
We offer a wide range of Additives for Paints, Coatings & Printing Inks which are largely used in paintings and coatings in industry. These additives are very cost effective and can be easily purchased by our customers at nominal pricing, in bulk quantities. Currently, Additives for Paints, Coatings & Printing Inks are available in the below mentioned varieties.
Partially replaces (15 - 25%) TiO2 in paints and coatings formulations. Improves optical properties and reduces cost.
Polyethylene Wax is widely used in coating & printing ink industries for surface modification by improving scratch and rub resistance.
Stearamide is a primary fatty acid amide wax. It provides very good anti blocking and slip properties. Suitable for printing inks (Gravure, Screen print, Flexo, etc.).
Micronized Ethylene bis Stearamide wax for powder coatings and printing inks.
Unsaturated fatty acid derived from oleic acid. Oleamide. Suitable for use in flexo and gravure printing inks.
Pure Zinc Stearate manufactured via fusion process by using the highest quality of raw materials. It is used as a flatting agent in Paints, varnishes & lacquers. It is an excellent flatting agent & sanding aid for lacquers & easily dispersed by stirring. It also aids in pigment dispersions.
Magnesium Stearate acts as a drier in paints & coatings. It decreases the drying time. Driers help corrosive paints improve their drying character even at low temperature & in a humid environment.
Calcium Carbonate is used as an extended or filler in paints & coatings applications.
Dolomite or Magnesium Calcium Carbonate is used as a filler in paints. It also imparts good scrub resistance.
Our personal care additives can be found in cosmetics. For pearlising & emulsifying agents in shampoos, liquid soaps, body lotions & shower gels Rchemine provides high quality EGMS. They are also used as opacifiers and secondary emulsifiers in lotions, conditioners & creams. We also provide GMS, an anti-static agent in masterbatches.
Glycerol Mono Stearate is produced by esterification of glycerol and fatty acids. It is one of the most used emulsifiers in cosmetics. It is found in dozens of personal care products such as eye cream, moisturizer, sunscreen and other products.
Our vegetable derived Ethylene Glycol Monostearate is primarily used as a pearlizing agent in shampoos, liquid soaps & shower gels. It is also used as an opacifier and secondary emulsifier in cream, lotions & conditioner.